INKOMA SSP jerin bakin karfe tsutsa gear dunƙule jacks gaba ɗaya sababbi ne kuma an ƙera su musamman don ƙaƙƙarfan buƙatun injunan takarda na zamani da makamantansu masu lalata. SSP ya dogara ne akan daidaitaccen kit, wanda za'a iya haɗa shi ta hanyar injiniya don ƙirƙirar tsararru don cimma ƙarfin tsarin da ake buƙata gabaɗaya. Hakanan SSP ya dace sosai ga masana'antar sarrafa abinci, wuraren tabbatar da fashewa, sinadarai da masana'antar tace mai.
Siffofin:
- Nauyin kaya: 15 t zuwa 25 t (5,000 kg zuwa 25,000 kg)
- Girma: 4 masu girma dabam akwai tare da damar dagawa daga 50 kN zuwa 250 kN
- Gudun Motsawa: Har zuwa 1500 rpm
- Nau'in Screw: Mashin ɗin trapezoidal mai kulle kansa, wanda aka yi da bakin karfe mai daraja
- Hawan Motoci: Flange na Mota na waje tare da daidaitaccen lissafin lissafi, mai jituwa tare da masana'antun Turai
- Siffofin ƙira:
- Gidaje: Ingantaccen ƙira na FEM tare da hadedde madaidaicin madaidaicin simintin gyare-gyare
- Kariya: Na'urar kai don haɗa takalmin kariya
- Lubrication: Babban ingancin lubrication
- Gear Ratios: Zaɓuɓɓuka biyu-na al'ada "N" da jinkirin "L"
- Daidaituwa: Ana iya musanya da sauran ma'auni na bakin karfe tsutsotsin gear dunƙule jacks
- Shawara: Kirkirar al'ada da shawarwari tare da injiniyoyi don ƙarin takamaiman buƙatu
Wannan tsarin ya haɗu da kayan aiki masu inganci, ƙirar zamani, da haɓaka don aikace-aikacen masana'antu daban-daban.
| Girman (SSP) | 5.1 | 15.1 | 20.1 | 25 | |
| Max. ƙarfin ɗagawa mai ƙarfi/a tsaye | [kN] | 50/75 | 100/150 | 200/200 | 250/250 |
| Max. kaya mai ƙarfi mai ƙarfi / a tsaye | [kN] | 50/75 | 99/99 | 178/200 | 250/250 |
| Screw Tr | 40×7 | 60×12 | 70×12 | 90×16 | |
| Rabo N | 6:1 | 7 2/3: 1 | 8:1 | 10 2/3: 1 | |
| Taga kowace juyin juya hali don rabo N | [mm/ kowace rev.] | 1.167 | 1.565 | 1.5 | 1.5 |
| Rabo L | 24:1 | 24:1 | 24:1 | 32:1 | |
| Dagawa kowane juyin juya hali don rabo L | [mm/ kowace rev.] | 0.292 | 0.50 | 0.5 | 0.5 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 20%/h | [kW] | 1.15 | 2.7 | 3.8 | 5 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 10%/h | [kW] | 1.9 | 3.85 | 5.4 | 7.2 |
| Ƙididdiga ingantaccen aiki | [%] | 36.5 | 39.5 | 37.5 | 36.5 |
| Overall yadda ya dace don rabo N | [%] | 24 | 27 | 24 | 22 |
| Babban inganci don rabo L | [%] | 16 | 17 | 17 | 15 |
| Juya karfin juyi a max. dagawa iko | [Nm] | 153 | 702 | 1061 | 1725 |
| Max. karfin juyi-shaft mai izini | [Nm] | 92 | 195 | 280 | 480 |
| Mass lokacin inertia J Ratio N nau'in 1 | [kg cm2] | 2.234 | 5.256 | 11.93 | 23.42 |
| Mass lokacin inertia J Ratio N nau'in 2 | [kg cm2] | 2.273 | 5.356 | 12.14 | 23.74 |
| Mass lokacin inertia J Ratio L nau'in 1 | [kg cm2] | 1.696 | 4.081 | 9.427 | 19.59 |
| Mass lokacin inertia J Ratio L nau'in 2 | [kg cm2] | 1.699 | 4.091 | 9.451 | 19.62 |
| Kayan gida | 1.4552 | ||||
| Nauyi ba tare da tsawon bugun jini ba da bututun kariya | [kg] | 16.2 | 26.5 | 36 | 70.5 |
| Matsakaicin nauyi a kowane bugun 100 mm | [kg] | 0.82 | 1.79 | 2.52 | 4.15 |
| Adadin mai mai a cikin kayan tsutsa | [kg] | 0.35 | 0.9 | 2 | 1.3 |
