INKOMA SHG mai saurin ɗaga screw jack an san shi don ƙarfin aiki da ƙarfin aiki, yana mai da shi babban zaɓi ga abokan ciniki waɗanda ke buƙatar ingantaccen inganci da tsawon rayuwar sabis. Akwai shi a cikin masu girma dabam huɗu, yana rufe kewayon kaya daga 1.5 t zuwa 9 t kuma yana da kyau don aikace-aikacen da ke buƙatar ɗaukar nauyi mai ƙarfi da tsawaita aikin hawan keke.
Siffofin:
- Ƙarfin Ƙarfafawa: 15kN zuwa 90kN
- Gudun Motsawa: Shigarwa yana sauri zuwa 3000 rpm
- Nau'in Screw: Trapezoidal ƙulla kai (akwai dunƙule ball na zaɓi)
- Lubrication: Rarrabe da'irori na lubrication don ingantaccen aiki
- Inji dunƙule tare da mai maiko
- Bevel Gears tare da mai-bath lubrication
- Ratios Gear Bevel: Akwai a cikin 2:1 da 3:1 rabo
- Ƙarfafawa: Case-hardened da ƙasa bevel gears da shafts
- Inganci: Helical karkace hakori bevel gears suna ba da babban saurin ɗagawa, ingantaccen inganci, da tsawon sabis
Jerin INKOMA SHG yana ba da cikakkiyar haɗuwa da sauri, dorewa, da aiki mai ƙarfi, yana mai da shi dacewa da masana'antu inda ake buƙatar babban inganci da amfani akai-akai.
| Girman (SHG) | 15 | 25 | 50 | 90 | |
| Max. ƙarfin ɗagawa mai ƙarfi/a tsaye | [kN] | 15 | 25 | 50 | 90 |
| Max. kaya mai ƙarfi mai ƙarfi / a tsaye | [kN] | 15 | 25 | 50 | 90 |
| Screw Tr | 24×5 | 35×8 | 40×7 | 60×9 | |
| Rabo N | 2:1 | ||||
| Taga kowace juyin juya hali don rabo N | [mm/ kowace rev.] | 2.5 | 4 | 3.5 | 4.5 |
| Rabo L | 3:1 | ||||
| Dagawa kowane juyin juya hali don rabo L | [mm/ kowace rev.] | 1.66 | 2.67 | 2.33 | 3 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 20%/h | [kW] | 1 | 1.5 | 2.4 | 8.9 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 10%/h | [kW] | 1.3 | 2.6 | 3.8 | 13 |
| Matsakaicin ƙimar aiki | [%] | 41 | 43 | 37 | 33 |
| Juya karfin juyi a max.lifing power | [Nm] | 29.4 | 73.2 | 123.4 | 398.5 |
| Matsakaicin karfin juyi-shaft mai izini | [Nm] | 50 | 125 | 175 | 1600 |
| Mass lokacin inertia J Ratio N nau'in 1 | [kg cm2] | 1.058 | 6.63 | 22.44 | 181.28 |
| Mass lokacin inertia J Ratio N nau'in 2 | [kg cm2] | 1.079 | 6.79 | 22.89 | 184.92 |
| Mass lokacin inertia J Ratio L nau'in 1 | [kg cm2] | 0.677 | 3.6 | 7.248 | 123.79 |
| Mass lokacin inertia J Ratio L nau'in 2 | [kg cm2] | 0.691 | 3.67 | 7.393 | 126.28 |
| Kayan gida | EN-GJL-250 | G-AlSi10Mg | EN-GJL-250 | ||
| Nauyi ba tare da tsawon bugun jini ba da bututun kariya | [kg] | 9 | 13.5 | 23 | 85 |
| Matsakaicin nauyi a kowane bugun 100 mm | [kg] | 0.8 | 0.59 | 1.5 | 2.5 |
| Adadin mai mai a cikin kayan tsutsa | [kg] | 0.15 | 0.9 | 0.6 | 3.5 |
