INKOMA KSH Bevel Gear High-Speed Screw Jack wani tsari ne na yau da kullun wanda ake samu a cikin masu girma dabam 3, kowanne yana ba da ƙimar gear guda biyu (2: 1 da 3: 1). Wadannan jacks an yi su da kayan inganci kuma an tsara su don sadar da ingantaccen aiki a cikin buƙatar aikace-aikacen ɗagawa.
Siffofin:
- Girma: Akwai a cikin masu girma dabam 3 tare da rabon gear biyu (2: 1 da 3: 1)
- Kayayyaki: Gidajen Gear ana yin su da ƙarfe na simintin ruwan toka na GG 25, kuma an ƙera kayan bevel daga ƙarfe mai inganci mai inganci, harsashi mai ƙarfi don dorewa.
- Bevel Gear Design: Yana amfani da kayan kwalliyar bevel na nau'in Klingelnberg, wanda aka haɗa tare don daidaito, wanda ke ba da gudummawa ga ingantaccen aiki da aiki mai santsi.
- inganci:
- Zaɓin dunƙule ball: Har zuwa 75% inganci, tare da saurin ɗagawa har zuwa 30 m/min.
- Zaɓin trapezoidal spindle: Har zuwa 40% inganci, tare da saurin ɗagawa har zuwa 13.5 m/min.
- Ƙarfafawa: Ƙarfin jujjuyawar juzu'i yana goyan bayan mashigin shigarwa da sandar ɗagawa, yana tabbatar da tsawon rayuwar sabis tare da ƙarancin kulawa.
- Zane Modular: Duk abubuwan da aka gyara na tuƙi sun dace da juna, suna ba da damar sassauƙa don aikace-aikace iri-iri.
Ƙarin Bayani:
- Akwai shi tare da juzu'in jujjuyawar juzu'i da fassarawa, kuma masu dacewa da trapezoidal da dunƙule ƙwal.
- Girman goro mai flanged sun dace da ka'idodin DIN 69051 don sukurori.
- Cikakken kewayon na'urorin haɗi akwai don biyan takamaiman buƙatun aikace-aikacen.
Ga kowace tambaya ko takamaiman buƙatun ƙira, ana ƙarfafa abokan ciniki su tuntuɓi ofishin tallace-tallace na gida na INKOMA ko injiniyoyin masana'anta don shawarwari da taimako na ƙwararru.
| Girman (KSH) | 1 | 2 | 3 | |
| Max. ƙarfin ɗagawa mai ƙarfi/a tsaye | [kN] | 15 | 40 | 90 |
| Max. kaya mai ƙarfi mai ƙarfi / a tsaye | [kN] | 15 | 40 | 90 |
| Screw Tr | 24×5 | 40×7 | 60×9 | |
| Rabo N | 2:1 | |||
| Taga kowace juyin juya hali don rabo N | [mm/ kowace rev.] | 2.5 | 3.5 | 4.5 |
| Rabo L | 3:1 | |||
| Dagawa kowane juyin juya hali don rabo L | [mm/ kowace rev.] | 1.66 | 2.33 | 3 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 20%/h | [kW] | 1 | 2.4 | 8.9 |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 10%/h | [kW] | 1.3 | 3.8 | 13 |
| Matsakaicin ƙimar aiki | [%] | 41 | 37 | 33 |
| Juya karfin juyi a max.lifing power | [Nm] | 29.4 | 123.4 | 398.5 |
| Matsakaicin karfin juyi-shaft mai izini | [Nm] | 50 | 175 | 1600 |
| Mass lokacin inertia J Ratio N nau'in 1 | [kg cm2] | 1.058 | 22.44 | 181.28 |
| Mass lokacin inertia J Ratio N nau'in 2 | [kg cm2] | 1.079 | 22.89 | 184.92 |
| Mass lokacin inertia J Ratio L nau'in 1 | [kg cm2] | 0.677 | 7.248 | 123.79 |
| Mass lokacin inertia J Ratio L nau'in 2 | [kg cm2] | 0.691 | 7.393 | 126.28 |
| Kayan gida | EN-GJL-250 | EN-GJL-250 | ||
| Nauyi ba tare da tsawon bugun jini ba da bututun kariya | [kg] | 9 | 23 | 85 |
| Matsakaicin nauyi a kowane bugun 100 mm | [kg] | 0.8 | 1.5 | 2.5 |
| Adadin mai mai a cikin kayan tsutsa | [kg] | 0.15 | 0.6 | 3.5 |
