INKOMA HSGK High Performance Screw Jacks an tsara su don buƙatar aikace-aikace, suna ba da dorewa na musamman da aiki. An sanye shi da lubrication mai da sanyaya fins, waɗannan jacks suna tabbatar da aiki mafi kyau ko da a cikin matsanancin yanayi. Tare da ingantaccen gini da kayan da aka zaɓa a hankali, suna ba da ingantaccen inganci da tsawon rayuwa.
Babban Abubuwan Samfur:
- Girma: Akwai a cikin samfura daga HSGK-3 zuwa HSGK-9
- Ƙarfin Load: Yana goyan bayan nau'ikan matsawa da nauyi har zuwa 1000 kN
- Gudun shigarwa: Har zuwa 3000 rpm
- Cooling Fins: Ingantattun ɓarkewar zafi don matsanancin yanayi
- Kayayyakin: Gidajen simintin ƙarfe na launin toka mai inganci, daidaitattun ingantattun fuskoki, alamar matakin mai, da dunƙule iska.
- Nau'in Spindle: Akwai tare da trapezoidal ko ballscrew spindles
- Gears: Tauraron tsutsa mai taurin kai da ginshiƙan ƙasa tare da ingantacciyar lissafi
- Taimako: Allura rollers suna goyan bayan lodin radial akan igiya don haɓaka rayuwa da aiki
- Zaɓuɓɓukan ƙira:
- Juyi juyi (R): Yana ba da ɗaga kai tsaye ta hanyar jujjuyawar igiya, tare da madaidaiciyar sandar axially.
- Sigar Fassara (S): Ƙaƙwalwar igiya tana motsawa da ƙarfi don ɗaga kaya, tare da iyakancewar tafiye-tafiye da rigakafin juyi da ake samu a cikin nau'ikan kamar SA.
Siffofin:
- Faɗin na'urorin haɗi akwai don keɓancewa
- Shigarwa yana sauri zuwa 3000 r/min da babban ƙarfin ɗaukar nauyi
- An ƙera shi don duka nau'ikan matsi da ɗamara
Don takamaiman tambayoyi, ƙira na al'ada, ko buƙatu na musamman (misali, sigar juriyar tsatsa ko gyare-gyaren gidaje), ana ba da shawarar yin shawarwari tare da ƙungiyar INKOMA don daidaita tsarin daidai da bukatun ku.
| Girman (HSGK) | 3 | 4 | 5 | 6 | 7 | 8 | 9 | |
| Max. ƙarfin ɗagawa mai ƙarfi/a tsaye | [kN] | 25 | 50 | 100 | 200 | 350 | akan bukata | 1000 |
| Max. kaya mai ƙarfi mai ƙarfi / a tsaye | [kN] | 25 | 50 | 100 | 178 | 350 | 1000 | |
| Screw Tr | 40×8 | 50×9 | 60×12 | 70×12 | 100×16 | 160×20 | ||
| Rabo N | 6:1 | 7:1 | 8:1 | 8:1 | 10 2/3: 1 | 13 1/3: 1 | ||
| Taga kowace juyin juya hali don rabo N | [mm/ kowace rev.] | 1.33 | 1.28 | 1.5 | 1.5 | 1.5 | 1.5 | |
| Rabo L | 24:1 | 28:1 | 32:1 | 32:1 | 32:1 | 40:1 | ||
| Dagawa kowane juyin juya hali don rabo L | [mm/ kowace rev.] | 0.33 | 0.32 | 0.375 | 0.375 | 0.5 | 0.5 | |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 20%/h | [kW] | 1.5 | 2.3 | 3.6 | 4.8 | 7.7 | 17.9 | |
| Max. karfin tuƙi2) a T = 20 °C Zagayen aiki (ED) 10%/h | [kW] | 2.6 | 4 | 6.3 | 8.4 | 13.5 | 31 | |
| Matsakaicin ƙimar aiki | [%] | 40 | 36.5 | 39.5 | 35.5 | 34 | 28.5 | |
| Juya karfin juyi a max.lifing power | [Nm] | 80 | 190 | 478 | 1060 | 2600 | akan bukata | 11115 |
| Matsakaicin karfin juyi-shaft mai izini | [Nm] | 48,7 | 168 | 398 | 705 | 975 | 4260 | |
| Mass lokacin inertia J Ratio N nau'in 1 | [kg cm2] | 1.247 | 3.1 | 11.97 | 30.11 | 60.76 | - | |
| Mass lokacin inertia J Ratio N nau'in 2 | [kg cm2] | 1.364 | 3.378 | 13.05 | 32.21 | 65.76 | - | |
| Mass lokacin inertia J Ratio L nau'in 1 | [kg cm2] | 0.638 | 1.804 | 8.13 | 20.91 | 44.88 | - | |
| Mass lokacin inertia J Ratio L nau'in 2 | [kg cm2] | 0.645 | 1.822 | 8.2 | 21.04 | 45.43 | - | |
| Kayan gida | EN-GJS-500-7(GGG50) | |||||||
| Nauyi ba tare da tsawon bugun jini ba da bututun kariya | [kg] | 13 | 25 | 47 | 74 | 145 | akan bukata | 870 |
| Matsakaicin nauyi a kowane bugun 100 mm | [kg] | 0.82 | 1.3 | 1.79 | 2.52 | 5.2 | 13.82 | |
| Adadin mai mai a cikin kayan tsutsa | [kg] | 0.4 | 0.9 | 1.5 | 2.1 | 5 | 15.5 | |
